Filter
Top Products
34
OPTION 1 settings
1. Obtain the MENU window and select
(highlight) the desired adjustment item
with the or buttons (on the projector
or remote control).
2. Adjust the parameter value for the
selected item with the or buttons.
OSD (On-Screen Display)
ON: The name of the signal applied is displayed in
the upper left corner of the screen whenever
the input signal source is switched from one to
another.
OFF: The signal name is not displayed even when
an input source switching occurs.
RGB FORMAT
“RGB FORMAT” is used to select the video signal
format depending on the signal applied to the RGB1
or RGB2 port: Only HDTV (1080i)
BACK COLOR
“BACK COLOR” is used to choose the background
color from blue or black when no signal is applied to
the video input ports:
BLUE: Sets background color to blue.
BLACK: Sets background color to black.
PROJECTION SCHEME 1
PROJECTION SCHEME 1 is used to choose the
appropriate projection scheme from Front and Rear:
FRONT: Choose this option if pictures are projected
from the front of a reflective screen.
REAR: Choose this if pictures are projected from
the back of a translucent screen.
PROJECTION SCHEME 2
PROJECTION SCHEME 2 is used to choose the
appropriate projection scheme from Floor and Ceiling:
FLOOR: Choose this option if the projector is installed
on a floor-standing base.
CEILING: Choose if the projector is installed on the
ceiling using the optional ceiling mount
bracket.
Note
• If a signal with unknown or unidentifiable format
is applied, it will be regarded as no signal and
the screen be set to the selected background
color.
OPTION 1
OSD
LENS SHIFT
FRONT/REAR
DESK/CEILING
OFF ON
FRONT
DESK
BACK COLOR BLUE
RGB FORMAT Y•PB•PR
SELECT ESC
ADJ
RGB FORMAT
RGB
Y•PB•PR
BACK COLOR
BLUE
BLACK
FRONT/REAR
FRONT
REAR
DESK/CEILING
DESK
CEILING
LENS SHIFT
“LENS SHIFT” is convenient for adjusting vertical
picture position in situations where the projector is
not easily accessible.
button: Shifts the picture upward.
button: Shifts the picture downward.
Note
• The screen picture move reverse direction
when press the or button under the ceiling
set up condition.
LENS SHIFT