Filter
Top Products
35
Basic Operation
34
Using the D.ZOOM (digital zoom)
function
This function lets you enlarge the
picture.
#Press a D.ZOOM +/- button
[
The picture will then be enlarged
to 1.5 times the normal size.
$Use the F, G, I and H buttons
to move the enlarged area
which you want to project.
&Press the MENU button to
return to the normal screen.
NOTE:
BThis function can only be used
when using the remote control
unit.
BIf the type of signal being input
changes while the digital zoom
function is being used, the digital
zoom function will be cancelled.
%Use the D.ZOOM +/- buttons to
change the enlargement ratio.
The enlargement ratio can be
changed within the range of x1 to
x4, by 30 steps.
Returning a setting to
the factory default
Select the STANDARD from the
menu screen by pressing the F or
G buttons and then press the
ENTER button to return all items
displayed on the screen to their
factory default settings.
BWhen a menu screen is being
displayed
POSITION
POSITION
DOT CLOCK
CLOCK PHASE
KEYSTONE
OSD POSITION
RESIZING
AUTO SETUP
FRAME LOCK
STANDARD
H: 128 V: 32
H: 0 V: 0
32
16
OFF
OFF
ON
ON
TOP LEFT
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]
Using the freeze function
The picture will alternate between a still picture and a moving picture each
time the FREEZE button on the remote control unit is pressed.
Still picture Moving picture