Filter
Top Products
37
Basic Operation
36
Color Hue Setting (color
temperature)
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
COLOR
(S-VIDEO/VIDEO/YPBPR only)
Press the H button to make the
color more vivid in tone, and press
the I button to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPR only)
This adjusts the flesh tones in the
picture. Press the H button to make
flesh tones more greenish, and
press the I button to make the
flesh tones more reddish.
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the I button if black areas are
too light (grey rather than black).
CONTRAST
This adjusts the contrast of the
picture. Press the H button to make
the picture brighter, and press the
I button to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
SHARPNESS
Press the H button to make the
picture details sharper, and press
the I button to make the picture
details softer.
STANDARD
HIGH
LOW
STANDARD
HIGH
LOW
Noise Reduction (NR)
(When S-VIDEO/VIDEO/YPBPR
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the H button. To turn it off , set
to “0” by pressing the I button.
TV SYSTEM
(S-VIDEO/VIDEO only)
AUTO1 The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
NOTE:
BThis should normally be set to
“AUTO1” or “AUTO2”. If the
signal is of such poor quality that
the correct format cannot be
automatically distinguished,
change the setting manually to
the required TV system.
AUTO1
AUTO2
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
Select the item pressing the F or G
buttons on the remote control unit or
the projector.
Press the I or H buttons to set the
selective items. For the value
adjusting items, press the ENTER
button to display an individual
screen, and press the I or H
buttons to adjust the setting.
Adjusting the picture
STANDARD
DYNAMIC
NATURAL
PICTURE MODE
Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is NATURAL. For rooms having
regular lighting conditions in use,
select STANDARD. For
exceptionally bright rooms, use
DYNAMIC.
PICTURE
PICTURE MODE
COLOR TEMP.
BRIGHT
CONTRAST
SHARPNESS
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
STANDARD
STANDARD
32
32
6
32
32
32
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]
When an RGB/DVI signal is being
input
PICTURE
PICTURE MODE
COLOR TEMP.
COLOR
TINT
BRIGHT
CONTRAST
SHARPNESS
NR
STANDARD
STANDARD
STANDARD
32
32
32
32
2
1
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]
When a YPBPR signal is being input
PICTURE
PICTURE MODE
COLOR TEMP.
COLOR
TINT
BRIGHT
CONTRAST
SHARPNESS
NR
TV-SYSTEM
STANDARD
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]
STANDARD
STANDARD
AUTO1
32
32
32
32
2
1
When an S-VIDEO/VIDEO signal is
being input
PICTURE
PICTURE MODE
COLOR TEMP.
BRIGHT
CONTRAST
STANDARD
STANDARD
STANDARD
32
32
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]
When the NETWORK/SD CARD is
selected (PT-L780NTU only)