Filter
Top Products
Basic Operation
Switching the projector on/off
ENGLISH - 21
1. Remove the lens cover from the lens.
2. Switch the MAIN POWER button on.
The power indicator lights up in red.
3. Press the power button.
The power indicator lights up in green after flashing
for a while.
The STARTUP LOGO is displayed on the screen.
See “STARTUP LOGO” on page 43.
1. Press the power button.
The confirmation screen is displayed.
To return to the projection, press any button except
the power button.
2. Press the power or ENTER button.
The power indicator lights up in orange while cooling
the lamp, then illuminates red when it is ready to
switch off the MAIN POWER button.
3. Switch off the MAIN POWER button on the left
side of the projector.
4. Attach the lens cover.
Switching on the projector
(1)
(1)
(3)
(3)
(2)
(2)
Power indicator
NOTE:
• When the internal cooling fan is operating, some operational sound may be heard. The loudness of the operational sound
depends on the external temperature.
• You can reduce the operational sound by setting the LAMP POWER in OPTION menu to the ECO-MODE. See “LAMP
POWER” on page 44.
• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the
characteristics of the lamp. Those are normal and will not affect the performance of the projector.
• Do not attempt to modify the lens cover which may cause burns, fire or damage to the projector.
Switching off the projector
(3)
(3)
(1)
(1)
(2)
(2)
Power indicator
NOTE:
• Press the power button twice or for a long duration to switch the power off.