Filter
Top Products
11
ENGLISH
Remote control receiver window (page 14)
This window receives the signal beam emitted from
the remote control.
Air filter (page 43)
Lens lock button (page 21)
Press this to remove the projection lens.
Level-adjusting feet (page 22)
Use these feet to adjust the tilt of the projector.
The leveling feet at the front left and right can be
adjusted.
Projection lens
Lens for projecting images on the screen.
Focus ring (page 24)
For focus adjustment.
Powered focus adjustment is also available.
Lens left/right adjusting dial (page 24)
Turn this clockwise to move the screen to the left;
conversely, turn it counterclockwise to move it to
the right.
AC IN terminal (page 22)
Connect the supplied line power cord into this
receptacle.
Do not connect any other cable to this socket.
MAIN POWER switch (page 22)
Use this switch to turn on “I” and off “O” the
commercial line power applied to the projector.
Lens cap
Cap the lens whenever the projector is left unused.
Side-mounted
connection terminals
(page 13)
Controls on upper panel (page 12)
Front and side of the projector
Downloaded from www.Manualslib.com manuals search engine