Filter
Top Products
12
Name and function of parts
Remote control receiver window (page 14)
This also receives the signal beam coming from
the remote control.
Lamp unit cover
The lamp unit is housed.
Ventilation holes
Clasp for attaching anti-theft chain
Attach a chain or other fastening device available
from a hardware store through this clamp.
Burglar lock
Attach a commercial burglar prevention cable (e.g.,
from Kensington) to this lock port. It is compatible
with the Microsaver Security System from
Kensington. Contact details for this company are
given below.
Kensington Technology Group ACCO Brands Inc.
2885 Campus Drive San Mateo, CA94403
Tel (650)572-2700
Fax (650)572-9675
http://www.kensington.com/
http://www.gravis.com/
LAMP monitor (page 42)
This lamp lights up when the time to replace lamp
unit is reached. It also blinks if something unusual
occurs in the lamp circuit.
Power indicator (page 22)
The lamp lights in red when the MAIN POWER
switch is turned to (I) (on). It turns to green when
the POWER button on the main unit or the
POWER ON (I) button on the remote control is
pressed.
POWER button (page 22, 23)
Turns on/off the power.
RGB input (RGB) button
Switches input as given below when pressed.
→→
RGB1
→→
RGB2
→→
DVI
MENU button (page 28)
Displays and clears the Main Menu. It can also
return to the previous screen when the menu is
displayed.
The on-screen display (OSD) selection menu can
be displayed by holding down the menu key for at
least three seconds.
LENS button (page 24)
Switches to the adjustment mode for lens focus,
zoom and shift (position).
Temperature monitor (TEMP) (page 42)
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.
AUTO SETUP button (page 25)
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen.
Video input (VIDEO) button
Switches input as given below when pressed.
VIDEO
←←→→
S-VIDEO
ENTER button (page 28)
Press this button to enter your menu selection or to
run function.
Arrow ( ) buttons (page 28)
Use to select an item on the menu screen, change
setting, adjust the sound volume and adjust the
level.
Also use them to enter the “SECURITY” password.
SHUTTER button (page 25)
Press this button to black out the image
temporarily.
Rear and side view of the main unit Controls on upper panel
Downloaded from www.Manualslib.com manuals search engine