Filter
Top Products
36
FAN CONTROL2
The fan can be controlled in accordance with the
direction in which the images are to be projected.
HORIZ. : Standard setting
VERTICAL : This is selected when projecting
images at a significant angle toward
the vertical (more than 30 degrees
from the horizontal).
FUNC1
You can set the functions of the FUNC1 button of
the remote control.
LAMP POWER: This button has the same
functions as “LAMP
POWER” of “OPTION2.”
ASPECT: This button has the same
functions as “ASPECT” of
“POSITION.”
SUB MEMORY LIST
: This button has the same
functions as “SUB MEMORY
LIST” of “OPTION1.”
AUDIO: This button has the same
functions as “AUDIO.”
KEY ASSIGN
You can set the functions of the buttons of
the remote control when the menu screen is not
displayed.
NORMAL: You can deactivate the
buttons when the menu screen is
not displayed.
VOLUME: You can adjust the sound volume
using the buttons when the
menu screen is not displayed.
AUTO POW.OFF
The projector can be automatically set to the
standby mode if no signals are input for the set
duration.
DISABLE : Standard setting. This function
is set to OFF.
15MIN.–60MIN.: The duration can be set in 5-
minute increments from 15 to
60 minutes.
PASSWORD
This function is used when a service person.
Input the password with the numeric buttons (0 to
9) of the remote control and press ENTER button to
confirm the entry.
• The auto power OFF function does not
work while the freeze function is used.
Note
H: HORIZ.
V: VERTICAL
30°
30°
30°
30°
V
V
HH
• Select the correct FAN CONTROL2
setting in accordance with the direction
in which the images are to be projected.
Using the projector at the wrong FAN
CONTROL2 setting will shorten the
service life of the lamps.
Attention
OPTION2 settings
Downloaded from www.Manualslib.com manuals search engine