Filter
Top Products
Setting up
26
- ENGLISH
Getting Started
Removing and attaching the projection lens
When replacing the lens or using an optional lens,
install the lens by following the instructions below. Ask
the sales dealer for detailed information of the optional
lens specications.
Removing the lens
J
1. Press and hold the <LENS> button or <LENS
SHIFT> button for more than 5 seconds to make
the lens return to the central position.
2. Turn off the projector and unplug the AC power
cord.
3. While pressing the lens release button, rotate the
projection lens counterclockwise, and remove the
projection lens.
Attention
Be careful when handling the lens. Do not drop.
z
Attaching the lens to the projector
J
1. Remove the lens mount cove
r.
2. Fit the lens to the projector by aligning the red dot
on the lens with the red dot of the projector.
3. Slowly turn the lens clockwise until it clicks. Make
sure that the lens is fully inserted to the projector.
Attention
Do not press the lens release button when attaching the
z
lens.
Lens release button
Red dots