Panasonic PT-LB51NTU Projector User Manual


 
Basic Operation
Switching the projector on/off
ENGLISH - 21
1. Plug the Power cord into the projector.
The POWER indicator lights up in RED.
2. Press the POWER button.
The POWER indicator lights up in GREEN after flashing for a while.
The STARTUP LOGO is displayed on the screen. See “STARTUP LOGO” on page 34.
1. Press the POWER button.
The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any
operation.
To return to the projection, press any button except the POWER button.
2. Press the POWER button.
The POWER indicator lights up in ORANGE while cooling the lamp, then illuminates RED.
3. Once the POWER indicator is lit red, unplug the Power cord from the projector.
If you are in a hurry, you can also use the direct power off function while unplugging the Power cord from the projector.
(page 20)
Switching on the projector
NOTE:
Some small rattling or tinkling sound may be heard when starting up, but this is normal and does not affect the
performance of the projector.
If you disconnected the Power cord while on projecting mode, the projection will start with connecting the Power cord.
See “DIRECT POWER ON” on page 35.
Switching off the projector
NOTE:
Press the POWER twice or for a long duration to switch the power off.
You can disconnect the Power cord instead of following this procedure. See “DIRECT POWER ON” on page 35.
You can turn off the projector by pressing the POWER button longer than 0.5 seconds.
(2)
POWER button
POWER indicator
(1)(2)
POWER button
POWER indicator