Panasonic PT-LB51NTU Projector User Manual


 
Settings
OPTION menu
ENGLISH - 36
If you use the projector at high elevation, the HIGHLAND
setting need to be ON to set the fan speed high. Press
I H to select the required option.
OFF The fan speed is low.
ON The fan speed is high.
(480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p
and VGA480 signals only)
This sets the signal that is input to the COMPUTER1 IN
and COMPUTER2 IN/1 OUT connector.
Normally “AUTO” should be selected. RGB or YP
BPR is
selected automatically depending on the synchronizing
signal status.
If an image is not projected correctly, select “RGB” or
YP
BPR” in accordance with the input signal.
AUTO automatically
RGB RGB
YP
BPR YPBPR
You can adjust the volume of the sound that is output
from the projector’s built-in speaker and VARIABLE
AUDIO OUT connector.
You can perform more detailed setting in various items.
J INDEX-WINDOW
This functions in the same way as the INDEX-
WINDOW button on the remote control unit.
Refer to “Projecting an image in INDEX-WINDOW
mode” on page 25 for details.
J SHUTTER
This functions in the same way as the SHUTTER
button on the remote control unit.
Refer to “Stopping the projection temporary” on
page 24 for details.
J OSD DESIGN
You can change the background color of the menu.
Press I H to select the required option.
J SXGA MODE
(COMPUTER SXGA signals only)
You can switch the setting between SXGA and the
larger setting, SXGA+. Press I H to select the
required option.
J XGA MODE
(COMPUTER XGA signals only)
You can switch the setting between XGA and the
wider setting, WXGA. Press I H to select the
required option.
J BLACKBOARD
You can exclude the BLACKBOARD in menu
items of PICTURE MODE in PICTURE menu.
Press I H to select the required option.
ON Include the BLACKBOARD in menu
items.
OFF Exclude the BLACKBOARD in menu
items.
J BACK COLOR
You can choose a BLUE or BLACK screen for
when the projector is idle. Press I H to select the
required option.
HIGHLAND
NOTE:
At 1 400 m (4 593 ft) above sea level, the setting must
be ON.
The loudness of fan noise depends on the HIGHLAND
setting.
RGB/YPBPR
VOLUME
DETAILED SETUP
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue