Filter
Top Products
ENGLISH-53
Adjustments and settings
52-ENGLISH
$Insert the SD memory card
which you would like to
register as a SD key 1.
%Press the ENTER button.
(To change the registered SD key)
#The “INSERT SD KEY.” screen
will be displayed.
Insert the current SD key.
$Press the ENTER button.
The “INSERT SD KEY 1 FOR
REGISTRATION.” screen will be
displayed.
%Remove the current SD key,
insert the new SD memory
card which you would like to
register as a SD key and press
the ENTER button.
INSERTED SD KEY
This shows whether the inserted SD
memory card is registered as a SD
key.
-
The inserted SD memory card has
not been registered as a SD key.
1
SD key 1
2
SD key 2
TO REGISTER SD KEY 1(2)
You can register up to 2 SD
memory cards as a SD key.
(When you register the SD key
for the first time)
#The “INSERT SD KEY 1 FOR
REGISTRATION.” screen will
be displayed.
Setting up the security function
This projector is equipped with a security function. All of the controls other
than the POWER button are disabled unless the password is entered
correctly or the registered SD memory card is inserted properly.
Press the F or G button on the
remote control unit to select
“SECURITY SETUP”, and then
press the ENTER button.
MENU
PICTURE ADJUSTMENT
POSITION ADJUSTMENT
OTHER SETUP
LANGUAGE SETUP
SECURITY SETUP
SD PICTURE SETUP
SELECT
ENTER EXIT
PASSWORD
OK
RETURN
SECURITY SETUP
SETUP OFF
AMEND PASSWORD
TO REGISTER SD KEY 1
TO REGISTER SD KEY 2
INSERTED SD KEY -
SELECT
ADJ RETRN
Press the F or G button to select
an item, and then press the I or H
button to change the setting.
For items without any selective
setting, press the ENTER button.
The next screen for the item will
then be displayed.
SETUP
You can select the security lock method
for when the power is turned on.
OFF
“SETUP” is disabled.
SD CARD
When the power is turned on, the
screen below will be displayed.
Inserting the registered SD card (SD
key) will release the lock.
PASSWORD
When the power is turned on, the
screen below will be displayed. Entering
the password will release the lock.
AMEND PASSWORD
Passwords can be changed.
(When you use the “SECURITY
SETUP” function for the first time)
Press the F, H, G, I, F, H, G
and I buttons in order, then press
the ENTER button.
(When a password change has
been made before)
Type in the changed password, then
press the ENTER button.
SETUP OFF
[
SD CARD
[
PASSWORD
NOTE:
BThe entered password will
appear as . It will not be
displayed on the screen.
B
If you enter the wrong password,
the letters “PASSWORD” and
“NEW” will become red. Enter
the correct password again.
NOTE:
BIf you insert a SD memory card
which has not been registered
as SD key, the letters on the
screen will become red. Insert
the correct SD key again.
#Set a password by pressing the
FF
,
GG
,
II
, and
HH
buttons.
A maximum of 8 buttons can be set.
$Press the ENTER button.
%Enter the password again for
confirmation.
&Press the ENTER button.
NOTE:
B
“SD key 2” can be registered
after “SD key 1” has been
registered. Register “SD key 2” in
the same way as for “SD key 1”.
AMEND PASSWORD
NEW
CONFIRM
OK
RETURN
INSERT SD KEY.
OK
PASSWORD
OK
NOTE:
B
“SD CARD” will not be displayed
when no SD memory card is
registered.
INSERT SD KEY 1
FOR REGISTRATION.
OK
RETURN
INSERT SD KEY.
OK
RETURN