Setting up
24
- ENGLISH
Getting Started
Adjusting the position using the vertical lens shift function
If the projector is not positioned right in front of the center of the screen, you can adjust the vertical position of
projected image by moving the vertical lens ring within the shift range of the lens.
Lens shift adjustment for PT-VX500U 1 )
and PT-VX501U
Lens shift adjustment for PT-VW430U2 )
Adjusting front adjustable feet
The adjustable feet can be extended by turning it as shown in the gure. It is retracted by turning it in the
opposite direction. (Projection angle can be adjusted vertically.)
Attention
Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
z
the front adjustable feet.
If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (
z
Æ
page 49)
Note
Screw up the adjustable feet, and an audible click will be heard as the limit.
z
Adjustable range
Front adjustable feet : 48.5 mm(1.909")
Feet Lock Latches
The display position can be shifted upward up
to 40% elevation of the display. (When turn
the vertical lens shift ring to the right (left), the
display moves up (down)).
The display position can be shifted upward
up to 48% elevation of the display. (When
turn the vertical lens shift ring to the right
(left), the display moves up (down)).
40%
Lens shift adjustable range
48%
Lens shift adjustable range
Shift range
Shift range
Lens shift center
position
Lens shift center
position
Attention
Please note the followings when using the projector.
Do not touch the lens while it is moving as this could cause injury to the ngers.
z
Never allow children to touch the lens.
z