Filter
Top Products
Network
64
- ENGLISH
Settings
Computer operation
Connection can be made with wired LAN. However, conrm to your system administrator on network settings
before changing any settings.
Turn on the computer.1 )
Make the network setting according to your system administrator.2 )
If the projector settings are the default settings (See page 61), the computer can be used with the
following network settings.
DHCP Off
IP address 192.16 8.10.101
Subnet mask 255.255.255.0
Default gateway 192.168.10.1
DNS1/DNS2 NONE
Accessing from the Web browser
Activate the Web browser in the personal computer.1 )
Enter the IP address set by the projector into the URL input eld of the Web browser.2 )
Enter your3 ) “User name” and “Password”.
z
The factory default settings are user1 (user privileges)
or admin1 (administrator privileges) for the use name
and panasonic (lowercase letters) for the password.
Click [OK] to display the Projector 4 )
status page.
z
“Projector status” page is displayed.
Note
Avoid activating two or more Web browser simultaneously to work out setting or control actions.
z
Change the password rst of all.
z
Administrator privileges enable the use of all functions. User privileges enable the use of only “Projector status”,
z
“Network status”, “Basic control”, and “Change password”.
If you want to control the projector using a Web browser, set [Network control] in the network menu to [On].
z
There are some control items used with the JavaScript function in the setting pages. If the web browser is set
z
not to use this JavaScript function, it may not control the projector properly.