Setting
58
- ENGLISH
Settings
Filter counter
This function is used to set a frequency for the lter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ►or the <ENTER> button to 2 )
access the submenu items.
Filter counter
J
Show the total accumulated time of the lter use timer
setting.
Timer
J
To set a timer. When the projector reaches the
selected time the lter warning icon appears on the
screen.
Press ▲▼ to select [Timer] and then 1 )
press the <ENTER> button.
Press ▲▼ to set the Timer.2 )
Select from [Off/1000H/2000H/3000H/
z
4000H/5000H/6000H] depending on the use
environment.
Filter counter reset
J
After replacing the lter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 )
reset].
Press the <ENTER> button. 2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Emulate
When using the control commands for one of our
projectors that you have previously purchased to
control this projector using a computer via its serial
input terminal , set up the [Emulate] function as
follows. This will allow you to use the control software
etc. designed for our existing projectors.
Press ▲▼ to select [Emulate].1 )
Press the <ENTER> button or the ► 2 )
button.
The [Emulate] screen appears.
z
Press ▲▼ to select the required item.3 )
Press the <ENTER> button.4 )
Note
Refer to "Serial terminal" (
z
Æ
page 88)
Default
VW430 series,
VX500 series, VX501 series
D3500 D3500 series
D4000 D4000 series
D/W5k
series
D5500 series,
DW5000 series, D5600 series,
DW5100 series, D5700 series
D/W/Z6k
series
D5000 series, D6000 series,
DW6300 series,
DZ6700 series,
DZ6710 series,
DZ570 series,
DW530 series,
DX500 series
L730
L520 series,
L720 series, L730 series
L780 L750 series, L780 series
L735 L735 series
L785 L785 series
LB/W series
LB2 series, LB1 series,
LB75 series, LB80 series,
LB90 series, ST10 series
F/W series
FX400series, FW430 series,
F100 series, FW100 series,
F200 series, F300 series,
FW300 series
LZ370 LZ370 series