Filter
Top Products
ENGLISH -
61
Settings
Network
Select [Setting] from the Main Menu (see
“Navigating through the menu” on page 36),
then select the item from the sub-menu.
Remote Control
Control Panel
Projector name
You can change the projector name to be displayed
on the network.
Press ▲▼ to select [Projector name], 1 )
and press <ENTER> button.
Select characters with the ▲▼◄► 2 )
buttons and press the <ENTER>
button to enter the projector name.
Select [Set] with the ▲▼◄► buttons 3 )
and press the <ENTER> button.
Select [Cancel] to undo the changes and then
press the <ENTER> button. Select [BS] to delete
one character selected with the cursor in the input
box.
Select [YES] or [No] with the ▲▼ 4 )
buttons and press the <ENTER>
button.
Network setup
You can make detailed wired LAN settings.
Press ▲▼ to select [Network setup], 1 )
and press <ENTER> button.
Press ▲▼ to select an item, and 2 )
change the setting according to the
instructions.
DHCP
(DHCP client
function)
On: If a DHCP server
exists in the
network to which
the projector is
connected, the
IP address will
automatically be
acquired.
Off: If a DHCP
server does
not exist in the
network to which
the projector
is connected,
additionally set
[IP address],
[Subnet mask
] and [ Default
gateway ].
IP address
(Display of IP
address and setting)
Enter the IP address
if DHCP server is not
used.
Subnet mask
(Displaying and
setting the subnet
mask)
If not using a DHCP
server, enter the subnet
mask.
Default gateway
(Display of gateway
address and setting)
Enter the gateway
address if DHCP server
is not used.
DNS1
(Display of
Preferred DNS
server address
and setting)
Enter the DNS server
address if DHCP server
is not used.
DNS2
(Display of
Alternate DNS
server address
and setting)
Enter the alternate DNS
server address if DHCP
server is not used.
Press ▲▼◄► to select [Set], and press 3 )
<ENTER> button.
Default wired LAN settings
z
The following settings are set before the
projector leaves the factory.
DHCP Off
IP address 192.168.10.100
Subnet mask 255.255.255.0
Default gateway 192.16 8.10.1
DNS1/DNS2 NONE
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS, ask the network administrator
.