Panasonic UB-T761 Projector Accessories User Manual


 
Connecting External Devices
1. Connect the external device to the elite Panaboard using a USB cable (sold separately).
elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard’s USB port.
External device: Plug the B connector (smaller connector) into a USB port on the external device.
USB Cable
(Sold Separately)
To USB Port
Flatbed
Scanner
MFP
To USB Port
About the Usage Location
Do not place the elite Panaboard where it is directly exposed to sunlight, near a stove, near to a heating/
cooling vent or exposed to strong winds.
Do not use the elite Panaboard in a location less than 10 °C (50 °F) or in a location subject to extreme
changes in temperature.
Note
The elite Panaboard may not work properly when used in one of the above locations.
20 Operating Instructions (For Basic Operations)
Usage