Troubleshooting
136
If the recording paper becomes jammed in the machine, the display will show an Information Code 001,
002, 007 or 008.
NOTE
1. The Recording Paper Jam message display is reset only by opening and closing of the Printer
Cover.
Clearing a Recording Paper Jam
To clear the jam, Info. Code 001, 002 or 008
1
(1) Slide out the Paper Cassette and remove
the Paper Cassette Cover.
(2) Remove the jammed or wrinkled paper and
reload the recording paper into the paper
cassette.
To clear the jam, Info. Code 007
1
(1) Open the Printer Cover.
(2) Remove the Toner Cartridge.
(3) Remove the jammed paper.
Note: 1 If at all possible, try removing the
jammed paper from inside of the
unit first (as shown in the upper
figure) to prevent toner that has
not been fused on the paper from
rubbing off and dirtying the Fuser
Roller.
2 To remove the jammed paper
from the rear of the unit (as
shown in the lower figure),
remove the Recording Paper
Tray Assembly first and gently
pull the jammed paper straight
out; taking care not to tear it.