Filter
Top Products
Customizing Your Machine
36
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST 1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
02 RESOLUTION 1 Standard Setting the home position for the RESOLUTION.
2Fine
3 S-Fine
4 Halftone
(Fine)
5 Halftone
(S-Fine)
04 STAMP 1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2On
05 MEMORY 1 Off Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
2On
06 DIALLING METHOD 1 Pulse Selecting the dialling method.
2 Tone
07 HEADER PRINT 1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
08 HEADER FORMAT 1 Logo, ID No. Selecting the header format.
2 From To
09 RCV'D TIME PRINT 1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received page.
2 Valid
10 KEY/BUZZER
VOLUME
1 Off Selecting the volume of the Key/Buzzer tone.
2Soft
3 Loud
12 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
2 Always
3 Inc. only
13 AUTO JRNL PRINT 1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
2 Valid
17 RECEIVE MODE 1 TEL Setting the receive mode.
2FAX
3 FAX/TEL
SW.
4 TAM I/F