Filter
Top Products
146
Journals and Lists
Explanation of Contents
(1) Indication of communication mode
(2) Start time of communication
(3) End time of communication
(4) File number : 001 to 255 (When the communication is stored into memory, a file number
is assigned for each communication.)
(5) Station number : Sequential number of the Stations.
(6) Communication result : ”OK” indicates that the communication was successful.
”BUSY” indicates that the communication has failed because of busy line.
”STOP” indicates that STOP was pressed during communication.
”M-OK” indicates that the substitute reception message in memory was not
printed out.
”P-OK” indicates that memory overflow or document misfeeding occurred
while storing the documents into memory for transmission but successfully
stored document(s) was sent.
”R-OK” indicates that the Relayed XMT or Confidential Communication was
successful.
”3-digit Info Code” (see page 155) indicates that the communication has failed.
In this case, the machine will print out the attached report with first page of your
document as shown on the previous page.
(7) Abbreviated number or ң mark : ң mark indicates dialed by direct number dial.
(8) Recorded name in One-Touch,
ABBR. or direct dialling number
(9) Number of pages transmitted or
received
: The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
(10) Duration of Communication
07001000002
07001110027