Filter
Top Products
R T
he unit should not be exposed to direct sunlight.
R The unit is not waterproof. Do not get the unit wet. Failure to do this may cause malfunction.
R Do not place heavy objects on top of the unit.
R When you leave the unit unused for a long period of time, unplug it from the power outlet.
R The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be
placed in rooms where the temperature is less than 5 °C or greater than 40 °C. Damp basements
should also be avoided. To avoid damage, charge the battery only in temperatures ranging from 5 °C
to 40 °C.
R Even when the Wireless Monitor and Wireless Camera are within 70 m and not used too close
together, if there are obstructions such as the ones below, problems such as signals becoming weak,
noise, interrupted transmissions, distorted images, and slow image refresh rates may occur, causing
the Wireless Monitor and Wireless Camera to not be able to be used together. (For information about
the signal display, see Operating Instructions for Wireless Door Camera (VL-SDM200BX).)
– walls with insulation material that contains aluminum foil
– walls made of concrete or galvanized iron
– when each device (Base Unit, Wireless Camera, and Wireless Monitor) is used on a different floor
– double insulating glass or metallic shutters
– places where several walls are separated by open space
R Some types of hearing aids may receive noise from wireless communications between the Base Unit,
Wireless Camera, and Wireless Monitor.
R When the Wireless Monitor and Wireless Camera are too close together, feedback may occur.
R Operating the product near electrical appliances may cause interference. Move away from the
electrical appliances.
Other information
Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
Others
R Red color indication of LED on this product is not related to the safety.
Requesting repairs for the unit
N
ote:
R The setting of the unit may be returned to factory default after the unit is serviced.
8
Important Information