Filter
Top Products
11
■ Power Up
Before operating the monitor, confirm that the cameras and
peripherals are connected correctly and securely.
1. Turn on the monitor by pressing the POWER button.
The Power Indicator lights in green.
2. Select the desired input to be displayed by pressing
the INPUT SELECT button.
Pressing this button will select the display (or audio)
input in the sequence shown below.
The selected input picture appears on the monitor
screen.
OPERATING PROCEDURES
VIDEO IN A VIDEO IN B S-VIDEO IN
Onscreen Display Video Input Audio Input
A CH VIDEO IN A AUDIO IN A
B CH VIDEO IN B
AUDIO IN B
S-VIDEO S-VIDEO IN
■ Display Setting
The Display Setting can be made onscreen as shown
below.
1. Press the MENU button.
The menu shown below appears on the monitor screen.
It will close automatically if no operation takes place
within about 10 seconds.
2. Move the cursor to the LANGUAGE parameter on the
next page in the menu with the C or D button, then
select the desired language with the - or + button.
Pressing the button will toggle the display language as
shown below.
PAGE1
BRIGHT 0
CONTRAST 0
SHARPNESS 0
COLOR 0
TINT 0
AFC SHORT
3.58TRAP OFF
NORMAL SETTINGS
PAGE2
AUDIO 0
STANDBY ON MODE 1
CH DISPLAY OFF
LANGUAGE ENGLISH
ENGLISH FRANÇAIS
+
-
ESPAÑOL