Filter
Top Products
16
Connect to 100BASE-FX Ports
Follow these steps:
Install and Connect to GBIC Module Ports
Follow these steps:
For a list of supported modules, refer to the release notes on Cisco.com. For detailed instructions on
installing and removing modules, refer to the documentation that came with the GBIC module.
Step 1
Remove the dust plugs from the
100BASE-FX ports and the rubber
caps from the MT-RJ patch cable.
Store them for future use.
Step 2
Insert an appropriate cable into a 100BASE-FX port. Insert the other cable end into an SC
or ST port on the other device.
Step 1
Grasp the module on the sides, and
insert it into the switch slot until you
feel the connector snap into place.
Step 2
Insert an appropriate cable into the
module port. Insert the other cable end
into the other device.
MODE
SYSTEM
RPS
STATUS
UTIL
DUPLX
SPEED
1X 2X 3X 4X 5X 6X 7X 8X
100BASE-FX ports
GBIC module
12
11
234
56
78
910
GBIC module port
12
11
234
56
78
910