Paradyne 3166 DSU Network Card User Manual


 
SNMP MIB Objects
E-3
3166-A2-GB20-10
November 1998
System Group – “sysObjectID” Object (system 2)
This object provides the authoritative identification of the network management
subsystem contained in the unit.
This object displays the following object identifier:
3166 [
Company OID
].1.14.2.2.8
System group –”sysContact” Object (system 4)
This object provides a textual identification of the contact person for this
managed node.
System Group – “sysName” Object (system 5)
This object provides an administratively-assigned name for this managed node.
System Group – “sysLocation” Object (system 6)
This object provides the physical location of this node.
System Group – “sysServices” Object (system 7)
This object provides a value which indicates the set of services that are
potentially offered by the DSU/CSU. Only the following values are supported.
H physical(1) – Layer 1 functionality for all interfaces.
H datalink/subnetwork(2) – Layer 2 functionality (SLIP, PPP) for the COM, AUX,
and MODEM ports.
H internet(4) – Layer 3 functionality (IP) for all management links.
H end-to-end(8) – Layer 4 functionality (UDP) for all management links.
Therefore, set this object to 15 (the sum of 1 + 2 + 4 + 8).
Interface Group, MIB II
The Interfaces Group consists of an object indicating the number of interfaces
supported by the unit and an interface table containing an entry for each
interface. The DSU/CSU provides an entry in the interface table for the network
interface, the synchronous data port, and the COM port. The following sections
provide clarification for objects contained in the Interface Group where it is not
clear how the object definition in MIB II is related to the DSU/CSU.
Interface Group – “ifNumber” Object (interfaces 1)
This variable contains the maximum number of MIB II supported interfaces
possible across the 31xx Series product line (9). This is different from the MIB
description, which is defined as the number of interfaces on the particular device.
This change allows the use of the same ifIndexes across all 31xx Series models.