Filter
Top Products
3. Using the Web Interface
6210-A2-GB23-00 January 2005
3-13
To complete the connection you must now click the Apply button. The Apply button
will temporarily save this connection. To make the change permanent, click on
Tools (at the top of the page) and select System Commands. At the System
Commands page, click on Save All.
Modify an Existing Connection
To modify an existing connection:
Procedure
1. From the Home screen, click on Setup.
2. Click on the connection you want to modify. The connections are listed on the
left by name.
If you delete a connection, to make the change permanent: Click on Tools (at the
top of the page) and select System Commands. At the System Commands page,
click on Save All.
Modem Setup
To configure the DSL modulation type:
Procedure
1. From the Home screen, click on Setup.
2. Under WAN Setup, select Modem Setup. This will bring up the Modem Setup
screen. Leave the default values if your ISP did not provide this information.
For most cases, this screen should not be modified.
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.