Filter
Top Products
3. Using the Web Interface
6210-A2-GB23-00 January 2005
3-15
Configuring the LAN
To configure LAN parameters, click on Setup on the Home screen. Under LAN
Setup, click on LAN Configuration. The LAN Configuration screen appears.
Figure 3-10. LAN Configuration Screen
By default, both the Ethernet port and USB port are in LAN Group 1. The USB port
may be removed from LAN Group 1 and added to LAN Group 2 for separate
configuration.
Enable/Disable DHCP
By default, the router has DHCP server (LAN side) disabled. If you already have a
DHCP server running on your network, do not enable the router’s DHCP server.
To enable DHCP:
Procedure
1. From the Home screen, click on Setup.
2. Under LAN Setup, select LAN Configuration. This will bring up the screen
shown in Figure 3-10, LAN Configuration Screen.
3. Click on the Configure link in the LAN Group 1 window. The LAN Group 1
Configuration screen appears.