Paradyne 6381-A3 Network Router User Manual


 
1. Introduction
1-2 January 2005 6381-A2-GB23-10
Preconfigured port settings for many popular games
Ability to act as a DHCP Server on your network
Compatibility with virtually all standard Internet applications
Address filtering and DMZ hosting
Downloadable flash software upgrades
Support for up to eight Permanent Virtual Circuits (PVCs)
Support for up to two PPPoE sessions
System Requirements
In order to use your modem for Internet access, you must have the following:
ADSL service subscription from your ISP.
One computer with an Ethernet 10/100BaseT network interface card (NIC) or
a free USB port.
(Optional) An Ethernet hub or switch, if you are connecting the device to
several computers on an Ethernet network.
For system monitoring or configuration using the supplied web interface, a
web browser such as Internet Explorer Version 5.5 or later.
Ports and Buttons (Back Panel)
POWER is where you connect the power supply.
RESET Button: The RESET button is used to reset the router to the factory
default settings selected by your service provider. Do not use the RESET
button unless advised to by your service representative.
LAN (Local Area Network) port: This is used to connect to Ethernet network
devices, such as a PC, hub, switch, or router.
USB (Universal Serial Bus port): Connects to a PC's serial port. The router
supports Windows-based PCs using an RNDIS driver (included on the CD).
PHONE port: This allows a phone to directly connect to the router. You do not
need to add splitter to the phone you connect here, since the router has an
internal splitter.
LINE port: This is the DSL interface which connects directly to your phone line.