Paradyne 6381-A3 Network Router User Manual


 
2. Hardware Installation and PC Setup
2-2 January 2005 6381-A2-GB23-10
cable to the LAN port and connect the other end to the 10/100BaseT port
on the network interface card in your PC.
If your LAN has more than one computer, you can attach one end of an
Ethernet cable to a hub or a switch and the other to the port labeled LAN
on the router. This probably will require an Ethernet crossover cable. See
the documentation for your hub or switch to be sure.
4. Connect the cylindrical power plug into the POWER connector on the back of
the device. Next:
If you have a wall-mount adapter, plug the AC adapter into a wall outlet or
a power strip.
If you have a table-top adapter, use the AC power cord to connect the
adapter to a wall outlet or power strip.
The supplied power adapter may look different than the one illustrated here.
5. Turn on your PC any other LAN devices, such as hubs or switches.
Figure 2-1. Hardware Installation
04-17510
LINE LAN POWERPHONE USB
OR
1
2
3
4
DEFAULT
RESET