Filter
Top Products
8
Web Interface
If you will use the Ethernet port for the web interface, you must set the IP address of the
port, or use the default address of 192.168.6.1. The IP address of the 8300 Endpoint
must be on the same subnet as the PC accessing the web interface.
Setting the Ethernet Port Address
To set the Ethernet port address:
Procedure
1. Access the Main Menu as described in
Connecting the Supervisory Port
on page 5.
2. Tab to the Interfaces selection and press Enter. The Interfaces menu appears.
3. Tab to the 10/100 Ethernet selection and press Enter. The IP Details screen
appears.
4. Enter an IP Address, Subnet Mask, and Gateway Address.
5. Tab to Save & Restart and press Enter. When the verification screen appears,
select Yes.