Filter
Top Products
3. DSL Card Configuration
8000-A2-GB26-50 April 2001
3-17
DSL Configuration Interfaces Screens
Use the system information submenu of the Interfaces screens to configure basic
interface information. This screen contains options for the logical layer of the
selected interface.
Procedure
To view DSL card information, configure Maximum Transmission Unit (MTU)
settings, bind filters to DSL interfaces, or restart, stop/disable, or monitor an
interface:
1. Follow this menu selection sequence:
Configuration
→
Interfaces
(
A-C
)
2. The Interfaces menu appears. Enter the desired value on each selected
screen and field as shown in Table 3-3, Interfaces Options, and press Enter.