Filter
Top Products
5
Installing in a Rack
Two types of mounting screws are provided. Use:
#10-32 mounting screws for rails with threaded screw holes
#12-24 mounting screws and self-retaining nuts for rails with unthreaded screw
holes
Procedure
To install the Probe in a rack:
1. Determine where in the rack you will mount the Probe. If your rack does not have
threaded screw holes, slip self-retaining nuts onto the rails where the Probe will be
fastened.
2. Place the unit so that the brackets rest against the front of the rails. Insert screws in
the bottom screw positions and hand-tighten them.
05-17709
23-inch (584 mm) EIA and Bay Networks
Rack Mount
19-inch (483 mm) Rack Mount
23-inch (584 mm) Nortel
Rack Mount