Index
9000-A2-GB31-00 December 2002
IN-3
Destination, 3-94
Default IP, 3-79
DLCI, 3-73–3-74
EDLCI, 3-74–3-75
Link, 3-73–3-74
dial backup, 4-5
Dial-In Access, 3-105
Dial-Out
Delay Time (Min), 3-97
Directory, 3-98
options, 3-93, 4-3
Trap, 3-97
Directory
Alternate Dial-Out, 3-98
disabling
ILMI, 3-71
disaster recovery, 4-5, 4-12
Discard Eligible (DE), 3-83
Disconnect
Time (Minutes), 3-91, 3-103, 3-107
Discovery
frame relay (FR), 2-14
Frame Relay Mode
saving a mode change, 2-16
displaying
configuration options, 1-4
DLCI, 3-84, 3-86
Alternate, 3-86
assigning to a Backup Group, 4-11
Destination, 3-73–3-74
Down on SLV Timeout, 3-12
IP Enabled, 3-65
Number, 3-64, 3-68
Priority, 3-67
Records, 3-64
Source, 3-72
Traps on Interfaces, 3-96
Type, 3-65, 3-69
DS0 Base Rate (PPP), 3-63
DSL
IDSL
network interface options, 3-25
Line Rate, 2-9
SDSL, 3-26
SHDSL, 3-27
SDSL
network interface options, 3-26
SHDSL
Line Rate, 3-27
network interface options, 3-27
DSLAM type
Alcatel (NewBridge), 2-5
Nokia, 2-5
PairGain, 2-5
Paradyne, 2-5
selecting, 2-5
DSR, 3-29–3-30
DSU Latching Loopback, 3-24
DSX-1
assigning data port to time slots, 3-58
assigning time slots, 3-52
setting up, 3-42
signaling assignments, 3-54
trunk conditioning, 3-54
DTE
port-initiated loopbacks, 3-34, 3-38, 3-40
DTR, 3-34, 3-37, 3-40
Ignore Control Leads, 3-102
E
Easy Install
options, 2-4
using, 2-2
EDLCI, 3-73–3-75, 3-85–3-86
Destination, 3-74–3-75
Source, 3-73
EIA-530-A
network physical interface options, 3-28
specifying port type, 2-10, 3-31, 3-36
EIR
enforcement, 3-61
Embedded DLCI, 3-73–3-75, 3-85–3-86
enabling ILMI, 3-71
Encapsulation Mode, 2-10, 3-71
entering ISDN call profiles, 3-48
entering system information, 4-3
Enterprise
Specific Traps, 3-95
Error
Event
LMI, 3-5, 3-61
Error Event
Cell Delineation Threshold, 3-71
Ethernet
Initial Route Destination, 3-94
Management Options Screen, 2-6
Ethernet port, 3-79
default gateway address, 3-100
even parity, 3-102
Excess Burst Size, 3-66
Excess Burst Size Be (Bits), 3-70
Excessive
Error Rate Threshold, 3-47