Filter
Top Products
2. Basic Configuration
9000-A2-GB31-00 December 2002
2-9
Network 1 DSL Line Rate (9783)
Possible Settings:
– If DSLAM Type is set to Paradyne, or if DSLAM Type is set to Nokia and Network 1
DSL Line Rate Mode is set to Fixed: 144, 192, 208, 256, 272, 384, 400, 512, 528,
768, 784, 1024, 1152, 1168, 1536, 1552, 2320
– If DSLAM Type is set to Alcatel (NewBridge): 208, 400, 784, 1168, 1552, 2320
– If DSLAM Type is set to Nokia and Network 1 DSL Line Rate Mode is set to Hunt:
192, 384, 768, 1152, 1536
– If DSLAM Type is set to PairGain: 144, 192, 208, 256, 272, 384, 400, 512, 528,
768, 784, 1024, 1152, 1168, 1536, 1552, 2320
Default Setting:
– If DSLAM Type is set to Alcatel (NewBridge) and Network 1 DSL Line Rate Mode is
set to Hunt: 208
– If DSLAM Type is set to Nokia and Network 1 DSL Line Rate Mode is set to Hunt:
384
– If DSLAM Type is set to PairGain and Network 1 DSL Line Rate Mode set to Fixed:
784
– (If DSLAM Type is set to Paradyne, Network 1 DSL Line Rate Mode is set to
AutoRate and Network 1 DSL Line Rate does not appear)
Determines whether the rate on the DSL interface is set to a specific value or
automatically detected using the Conexant AutoBaud algorithm.
144 – 2320 – Sets the DSL line rate in kbps.
Network 1 DSL Line Rate (9788)
Possible Settings:
– If PSD Mask is Symmetric: 200, 264, 328, 392, 456, 520, 584, 648, 712, 776, 784,
840, 904, 968, 1032, 1096, 1160, 1224, 1288, 1352, 1416, 1480, 1544, 1552, 1608,
1672, 1736, 1800, 1864, 1928, 1992, 2056, 2120, 2184, 2248, 2312
– If PSD Mask is Asymmetric and Region Setting is Annex A: 776, 784, 1544, 1552
– If PSD Mask is Asymmetric and Region Setting is Annex B: 2056, 2312
Default Setting: [None]
Determines the rate on the DSL network interface. Valid rates, and the rates presented on
the screen, depend on the values of Region Setting and PSD Mask on the Network
Physical Interface Options screen. If a change to another configuration option renders the
selected DSL Line Rate invalid, the line rate is set to AutoRate.
Display Conditions – Network 1 DSL Line Rate does not appear if Network 1 DSL Line
Rate Mode is set to AutoRate.
200 – 2312 – The DSL line rate is set to the specified rate in kbps.
Network 1 Operating Rate (9720)
Possible Settings: AutoRate, 64, 128, 144
Default Setting: AutoRate
Determines the rate on the IDSL network interface.
AutoRate – The unit automatically detects the line rate from the network interface.
64, 128, 144 – The IDSL line rate is set to the specified rate in kbps.
Table 2-1. Easy Install Configuration Options (6 of 7)