Filter
Top Products
(pins 13-25 and 38-50 are not used)
3.0 SAM2000G DEFAULT CONFIGURATIONS
No configuration is necessary for the SAM2000G to operate at default settings.
3.1 IP DSLAM Management
3.1.1 User Access
3.1.1.1 Network Management System (NMS) and Command Line Interface (CLI)
3.1.1.2 Simple Network Management Protocol (SNMP)
3.1.2 Management Parameters
The parameter defaults listed are common to all DSLAM/MUM model types. Some models
have additional configuration possibilities; refer to the User Guide and/or Installation
Instructions for your particular model.
SHDSL RJ21 PORT PINOUT
PORT 1 2 3 4 5 6 7 8 9 10 11 12
SHDSL
Ring 1 2 3 4 5 6 7 8 9 10 11 12
Tip 26 27 28 29 30 31 32 33 34 35 36 37
NOTE
All usernames and passwords are case sensitive.
ACCESS USERNAME PASSWORD
read/write superuser Password
read only general Password
ACCESS COMMUNITY STRING
read/write Password
read only Password
210-0000026 rev07