(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a
more rapid, less constant rate.)
6.3 Regulatory Compliance for Class A Equipment
The following regulatory compliance information applies to the SAM2000G-12, SAM2000Q-12
and/or SAM2000-12 as installed in Net to Net Technologies' IP DSLAMs.
6.3.1 US Federal Communications Commission (FCC)
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Caution: Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
6.3.2 Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
6.3.3 Europe
This Class A product complies with European Norm EN55022.
Warning: In a domestic environment this product may cause radio interference in which case
t
he user may be required to take adequate measures to correct the situation.
SHDSL Data
Reception (Rx)
flashing
amber
SHDSL activity The port is receiving data from the remote
SHDSL modem or statistical packets from your
IP DSLAM's management.
solid amber heavy Rx traffic The port is receiving large amounts of data from
the remote SHDSL modem or statistical packets
from your IP DSLAM's management.
no
illumination
no activity A link may exist but the port is not receiving
any data from the remote SHDSL modem or
statistical packets from your IP DSLAM's
management.
SHDSL Data
Transmission
(Tx)
flashing
amber
SHDSL activity The port is transmitting data to the remote
SHDSL modem.
solid amber heavy Tx traffic The port is transmitting large amounts of data
to the remote SHDSL modem.
no
illumination
no activity A link may exist but the port is not transmitting
any data to the remote SHDSL modem.
210-0000026 rev07