Filter
Top Products
17
Communication Port
Select Communication Port to configure the FrameSaver unit’s COM port.
Communication Port
Configuration Option Settings Default in [Bold]
Port Use [Terminal], Net Link
When Port Use is set to Terminal:
Data Rate (Kbps) 9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2
Character Length 7, [8]
Parity [None], Even, Odd
Stop Bits [1], 2
Ignore Control Leads [Disable], DTR
Login Required Enable, [Disable]
Port Access Level [Level-1], Level-2, Level-3
Inactivity Timeout [Enable], Disable
Disconnect Time (Minutes) 1–60 [10]
When Port Use is set to Net Link:
Data Rate (Kbps) 9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2
Character Length 7, [8]
Parity [None], Even, Odd
Stop Bits [1], 2
Ignore Control Leads [Disable], DTR
IP Address 001.000.000.000–223.255.255.255, [Clear]
Subnet Mask [000.000.000.000]–255.255.255.255, Clear
Link Protocol [PPP], SLIP
RIP [None], Standard_out