Filter
Top Products
16
WLAN1500 Wireless PC LAN Card
®
The PCMCIA slot supports “hot swapping” of PCMCIA adapter, allowing you to insert
or remove the ParkerVision Wireless LAN Card from the slot whenever you like,
even when power to your computer is on. However, you should always disable the
ParkerVision Wireless LAN Card prior to card removal to allow Windows to log off
from the network server.
POWER
Green On The ParkerVision Wireless LAN Card is receiving power.
LINK
Orange On The ParkerVision Wireless LAN Card has a successful wireless
connection.
Blinking The ParkerVision Wireless LAN Card is sending/receiving data
through the wireless connection.
Windows will automatically detect the WLAN1500 Wireless LAN Card and the FOUND NEW
HARDWARE Wizard Dialog Box will appear. Follow the on-screen instructions to install the
ParkerVision Wireless driver. If the Wireless LAN Card is not inserted properly, the following error
message will appear:
To confi rm proper installation of the ParkerVision-Wireless LAN Card:
• Right-Click MY COMPUTER from the Windows desktop.
• Click PROPERTIES.
• Open DEVICE MANAGER.
• Select the HARDWARE folder tab, and then click the DEVICE MANAGER button.
• Double-click NETWORK ADAPTERS. No special markers should appear next to the WLAN1500
Wireless LAN Card selection.
• Double-click WLAN1500 Wireless LAN Card. Refer to the tab labeled GENERAL. The DEVICE
STATUS Window will indicate that the device is working properly.
For Windows 2000 users, a DIGITAL SIGNATURE NOT FOUND
message may appear. Simply select YES to proceed.
For Windows XP users, a WINDOWS LOGO TESTING NOT FOUND dialog box may appear. Click
CONTINUE ANYWAY to proceed. ParkerVision Wireless D2D software has been tested to work
with Windows XP, and the installation should be continued with confi dence.