Filter
Top Products
CopperLink 1214E Series Quick Start Guide 5
2.0 Power up the CL1214E Series
The CL1214E Series comes with an external AC power supply (see figure 2).
Figure 2.
Power Supply Installation
2.1 Models with external AC adapter
1. To connect the AC power supply, determine the positive lead and negative lead on
the power adapter.
2. Insert the positive lead into the opening on the terminal block labeled + and the
negative lead into the opening on the terminal block labeled -.
3. Tighten the screws on the block to secure the wires.
The CL1214E Series powers up as soon as it is connected to an AC power source—
there is no power switch.
2.2 Power up indication
Verify that the Power LED on the front panel (see figure 3) illuminates and remains lit.
Figure 3.
CL1214E front panel
3.0 Connect the CopperLink interface
1. Obtain single-twisted-pair cable with an RJ-45 plug connector at each end.