Patton electronic 1008/I Modem User Manual


 
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support at:
tel: (301)975-1007
email: support@patton.com
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1088. Technical Support hours: 8AM to 5PM EST, Monday
through Friday.
3
22..00 GGEENNEERRAALL IINNFFOORRMMAATTIIOONN
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Provides MAC Level Data Link (Layer 2) connection between two
peered 10BaseT Ethernet LANs
• Operates transparently to higher level protocols such as TCP/IP,
DECnet, NETBIOS and IPX
• PPP (Point to Point Protocol, RFC 1661) with Bridge Control
Protocol (RFC 1638)
Automatically learns, loads and removes MAC addresses
Point-to-Point Connectivity over 2-Wire mDSL up to 10km
• NetLink Plug-and-Play Slave
• HTTP/SNMP Manageable as CP (Customer Premises) Unit with
1095RC CO (Central Office) Rack Card
• Internal or receive recovered clocking between units
• LED indicators for 10BaseT Link, DSL Link, Status, No Signal,
Error and Test Mode
2.2 DESCRIPTION
The NetLink
TM
10BaseT mDSL Rocket (Model 1088) is a Multi-
Rate DSL Modem that provides seamless MAC Layer connectivity
between 2 peered 10BaseT LANs. Now, Enterprise users no longer
need to hassle with a bridge and a CSU/DSU or recurring leased line
costs. The NetLink Rocket allows users to add additional nodes to a
LAN that has reached its maximum distance limits or separate high
traffic areas of a LAN. The Rocket connects peered LANs and auto-
matically forwards and receives LAN broadcasts, multi-casts and
frames across a 2-Wire DSL span. The 1088/I supports PPP (RFC
1661) and BCP (RFC 1638).
The
NetLink
TM
mDSL 10BaseT Rocket features include loop-
back diagnostics, inband SNMP/HTTP remote management capabili-
ties using NetLink Plug-and-Play and externally accessible configura-
tion switches. As a symmetric DSL modem, the NetLink
TM
mDSL
Rocket offers the same data rates in both directions over a single pair
of regular telephone lines using Carrierless Amplitude and Phase
(CAP) modulation. The Rocket connects to the DSL line via an RJ-45
jack. Standard power options include 115VAC, 230VAC, Universal
(115/230VAC) and any DC input between 36-60VDC.
4
NOTE: Packages received without an RMA number will not be
accepted.