Filter
Top Products
10
Switch S1-8:
Must be set to the OFF position (Reserved).
Configuring DIP switch S2
DIP switches in S2 are reserved and must be set in the OFF position.
The following table summarizes default positions of DIP switches S2-1
through S2-8.
Important
A pair of Model 1053s communicate synchronously
across the twisted pair line connection. Therefore,
you
must set these switches whether your application is
async or sync
. For Sync or Async applications, please
configure one Model 1053 for internal clock mode and the
other Model 1053 for receive recover clock mode.
S1-8 Setting
Off Reserved