Filter
Top Products
15
SW1-6/7 Clock Mode.
Use Switches S1-6 and S1-7 to configure the
1082 or Model 1082/144 for internal, or receive recover clock mode.
Note
Placing SW1-6 and SW1-7 in the OFF mode performs reset of
the hardware/software.
SW1-8 RDL Function.
Use Switch S1-8 to allow Model 1082/F to enter
the Remote Digital Loopback diagnostic test when requested to do so by
the far end Modem. For example, when switch S1-8 is set to “ON”, it will
enter RDL mode when requested to do so by the remote Model 1082.
S1-6 S1-7 Description
ON ON Internal clock (DEFAULT)
ON OFF Recover clock
OFF ON Network clock
OFF OFF Hardware/software reset
ON Respond to RDL (DEFAULT)
OFF Response to RDL disabled