Filter
Top Products
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions arise during
installation or use of this product, please contact Patton Electronics’
Technical Support at: (301) 975-1007.
2.1 FEATURES
• Synchronous data rates: 19.2, 32, 56, 64 and 128 kbps in all clock
modes
• Asynchronous data rates: 0 - 38.4 kbps
• SNMP manageableusing Patton Model 1001MC Card
• Full duplex operation over one or two
twisted pair (2- or 4-Wires)
• Point-to-point distances up to 11 miles (17.6Km)
• Remote digital loopback, local line loopback diagnostics
• Internal, external or receive recovered clocking options
• LEDindicators for TD, RD, CTS, CD, DTR, TM, ER and NS
• Fits in Patton’s 1001 2u (3.5”) rack chassis
• Made in the U.S.A.
2.2 DESCRIPTION
The Patton Model 1092ARC KiloModem 2W/4W
TM
baseband
modem allows synchronous or asynchronous data to be transmitted up
to 11 miles (17.6 km) over one or two twisted pair (2 or 4 Wire).
Supporting synchronous speeds up to 128 kbps and asynchronous
speeds up to 38.4 kbps, the 1092ARC is perfect for LAN
interconnection or high speed internet links.
To compensate for poor line quality, the Model 1092ARC
supports 2B1Q encoding, Automatic Equalization, and Auto Gain
Control. The 1092ARC is fully SNMP manageable using Patton’s Model
1001MC Management Card. Software configuration is performed via
the VT100 screens. Swappable interface driver boards and interface
cards allow the user to easily change applications between RS-232,
V.35, X.21, G.703, RS-530, 10Base-T, or Ethernet. The Model
1092ARC also features convenient front panel diagnostic switches and
LEDs that allow for easy setup, configuration and testing.
The Model 1092ARC is designed to fit into Patton’s 1001 2U
(3.5”) high rack chassis. This chassis uses a mid-plane architecture
allowing front cards to be plugged into different rear cards. Please see
the Model 1001RP14 manual for more information on the power supply
options.
4
1.3SERVICE iNFORMATION
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Services at:
tel: (301)975-1007;
email: support@patton.com, or;
www: http://www.patton.com.
NOTE:Packages received without an RMA number will not be
accepted.
Patton Electronics’ technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1092ARC. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
3