Patton electronic 1214 Switch User Manual


 
Introduction 20
CopperLink 1214 User Manual 3 • Configuration
Introduction
The CL1214 has eight DIP switches (S1) for configuring the unit for a wide variety of applications. This sec-
tion describes switch locations and explains the different configurations.
Configuring the Hardware DIP switches
The DIP switches are externally accessible
from the underside of the CL1214. Figure 7 shows the orientation
of the DIP switches in the On and Off positions.
Figure 7. DIP switch orientation
Configuring DIP Switch S1
DIP switch S1 is where you configure the CopperLink line. The
following tables describe the configuration for
the CL1214.
Table 1. S1 Summary
Position Description
S1-1 Local/Remote Configuration
S1-2 Line Rate/Symmetry
S1-3 Line Rate/Symmetry
S1-4 Reserved
S1-5 SNR Margin
S1-6 Reserved
S1-7 Reserved
S1-8 Reserved
Push toggle up
for ON position
Switch toggle
Push toggle
down for
OFF position
S1
1234
ON
1234
ON
S1
S1
5678
5
6
7
8