Filter
Top Products
Model 3231 Quick Start Guide
3
2.0 Using the keypad
The Model 3231 contains an LCD menu and keypad, located on the front panel, for configuring the unit.The four
keys on the menu keypad and their functions are:
3.0 Using the LCD Menu
The following options are available in the top level menu on the LCD interface:
•
3.1 “G.SHDSL”
on page 4
•
3.2 “LAN”
on page 4
•
3.3 “CPE Config”
on page 4
•
3.4 “STP (Spanning Tree Protocol)”
on page 5
•
3.5 “Syslog”
on page 5
•
Password
If a password is set, a user must enter the password to access the LCD submenus. Enter an empty string to
remove the password.
•
Clear Alarms
Clear DSL, Ethernet, and any other alarm indications.
•
Save Config
Save the current configuration to flash.
•
LCD Contrast
Adjust the contrast of the LCD screen. Use the Left and Right Arrown keys to adjust the contrast, then press the
Enter key to save the adjustment.
Key
Purpose
ENTER
• Select the current item
• Advance into a submenu
• Confirm changes in a menu item
EXIT
• Deselect the current item
• Exit out of a submenu
• Cancel a change in a menu item
LEFT ARROW
• Move to the previous item in a menu
• Move to the previous value for an item in a menu
• Increment the current digit or character in an IP address or string
RIGHT ARROW
• Move to the next item in a menu
• Move to the next value for an item in a menu
• Select the next digit or character to change in an IP address or string