Filter
Top Products
Model 3231 Quick Start Guide
5
3.4 STP (Spanning Tree Protocol)
3.5 Syslog
4.0 Connecting the G.SHDSL port
1.
Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.
2.
Plug one end of the cable into the RJ-11 socket (labelled
Line)
on the modem.
3.
Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.
4.
From the top level menu on the LCD panel, use the Left and Right arrow keys to navigate to
G.SHDSL
,
then press
ENTER
.
Note
If two Model 3231 units are connected back-to-back, one must be configured as
CO
, the other as
CPE
.
See the
Model 3231 Getting Started Guide
for more information.
5.
The
DSL Link
LED will flash while in the process of establishing a link. The LED will be on constantly once
a valid DSL connection is established.
Submenu
Options
Enabled Enable or Disable STP
Fwd Delay 4 – 30 seconds
Hello Time 1 – 10 seconds
Max Age 6 – 40 seconds
Submenu
Options
Host IP External syslog server to log to
Facility disable / user / mail / daemon / auth / syslog / lpr / news / uucp / cron
authpriv / ftp / local0 / local1 / local2 / local3 / local4 / local5 /
local6 / local7