Filter
Top Products
8
4.0 INSTALLATION
The sections on the next page describe installing the following:
• Model 460 (see section 4.1, “Installing the Model 460” on page 8)
• Model 460-TBP (see section 4.2, “Installing the Model 460-TBP” on
page 8)
Refer to the appropriate section to install your unit.
4.1 INSTALLING THE MODEL 460
Do the following:
1. Refer to the pin configuration below when assembling the cable that
will connect to the RJ-45 jack.
2. Plug the modular cable connector into the RJ-45 jack.
3. Connect the coaxial cables to the TX Out and RX In connectors.
Congratulations, you have finished installing the Model 460!
4.2 INSTALLING THE MODEL 460-TBP
Do the following:
1. Strip the outer jacket insulation from the twisted pairs about 1 inch.
2. Strip back the insulation on each of the wires about 0.25 inches.
RJ-45 Pin(s) Function
1 and 2 TX pair
3 TX shield
4 and 5 RX pair
6 RX shield