Filter
Top Products
9
Figure 4.
Model 460-TBP terminal block interface wiring diagram
3. Connect one pair of wires to the two XMT (transmit) positions on the
terminal block. The Model 460-TBP is not polarity sensitive so either
wire may connect to either pole. See Figure 4.
4. Connect the other pair of wires to the two RCV (receive) positions
on the terminal block.
5. Connect the coaxial cables to the TX Out and RX In connectors.
Congratulations, you have finished installing the Model 460-TBP!
Gaithersburg, Maryland
Model 460F-TBP
G.703 Balun
S/N:9912130009 Lot: 00774
RX In TX Out
RCV
XMT
Terminal block
Clamp
screws
(4 places)
RX In
TX Out
RCV
XMT
Coax
CPE
Twisted-pair
CPE
CPE
XMT RCV
RCV
XMT
XMT
RCV
Pair 1
Pair 2