Filter
Top Products
Introduction
3
SmartNode 4830 Quick Start Guide
Introduction
This Quick Start Guide leads you through the basic steps to set up a new SmartNode (see figure 1) and to
download a configuration. Please note that this guide does not replace the detailed Software Configuration
Guide and the Getting Started Guide on the CD-ROM and available online at
www.patton.com/voip
.
Figure 1. SmartNode product (SmartNode 4838 shown)
SmartNodes can be used for a wide variety of IP and voice over IP applications. To support and ease the config-
uration of the SmartNodes configuration templates for the most important applications are available online at
http://www.patton.com/voip/appnotes.shtml
.
Setting up a new SmartNode consists of the following steps:
1.
Connect a PC to the SmartNode, log in and configure your LAN IP address (see page 4 for details)
2.
Connect the SmartNode to the LAN (see page 6)
3.
Download a configuration example, adapt it to your network, and load it onto the SmartNode (see page 6)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030