Filter
Top Products
Item Pricing Application
________________________________________________________________________
35
To set up the printer to communicate:
♦ the communication parameters must be set.
♦ a communications cable must be connected from your PC to your
printer.
♦ the printer must be in Receive mode.
The following are the correct settings - an asterisk indicates factory-set
defaults.
Parameter Default
Baud Rate: 9600*
Parity: Odd*
Data Bits: 7*
Stop Bits: 1*
Flow Control: Xon/Xoff*
Echo BEL: (does not matter)
ENQ Polling: enable
Resp.Timeout: 30*