Filter
Top Products
8 RF link Operating Instructions RF link Operating Instructions 9
Sierra Sport 2 Printers
To link a Sierra Sport 2 printer to a data collection terminal:
1. Turn off the printer and the terminal’s RF link module.
2. Turn on the printer.
3. Turn on the terminal’s RF link module.
4. When a link is established, the RF link module’s LED blinks, and RF
Ready appears on the printer’s screen.
Renegade 4 Printers with Internal Modules
To link a Renegade 4 printer (with an internal RF link module) to a data
collection terminal:
1. Turn the printer, terminal, and the RF link modules off.
2. Turn on the printer. The green LED on the side of the printer turns on.
3. Wait for the printer's LED (near the trigger) to blink once.
4. Turn on the terminal's RF link module. The green LED turns on. Then,
the LEDs on both modules start blinking.
5. Turn on the terminal.