Filter
Top Products
4-2 Operator’s Handbook
Problem Action
Label exits partially out
of the printer or skips a
label.
A label may be caught in the
printer. See “Clearing Label
Jams” in Chapter 3 for more
information.
Make sure the labels are
loaded correctly and that they
are the FreshMarx labels
recommended for this
application. See “Loading
Labels” in Chapter 1 for more
information.
Make sure the labels are
loaded correctly and that they
are the FreshMarx labels
recommended for this
application. See “Loading
Labels” in Chapter 1 for more
information.
Printing is faded or
poor quality.
Clean the printhead. See
“Cleaning the Printhead” in
Chapter 3 for more
information.
Paper Out error
appears.
Load labels. See “Loading
Labels” in Chapter 1 for more
information.
Printhead Over
Temperature error
appears.
Turn off the printer and allow it
to cool down before you
resume printing.
Motor Over
Temperature error
appears.
Turn off the printer and allow it
to cool down before you
resume printing.
Technical Support
If these solutions do not work, call Service at the
number listed on the back of this manual.